Technological solutions for resources recovery from end-of-life products and materials
- Tuesday, November 5, 2024
- 10:00 - 17:30
- Memo
- Tiglio Room A6 pav.
- English
- Italian
- organized by Ecomondo STC & Italian Chemical Society – Division Environmental and Cultural Heritage Chemistry, ISWA international, ATIA – ISWA
with speeches and posters from the Call for Papers 2024
The current circular material use rate in the EU is estimated below 12%, indicating a considerable difficulty in the valorisation of end-of-life goods. Thus, the increasing demand for natural resources still characterizes most economic value chains, hindering an effective implementation of the principles of circular economy. A stronger effort is clearly needed to reach the European target of recycling and recovery, with the fundamental contribution of technological innovations, which can trigger virtuous industrial experiences.
This seminar will propose examples of novel technical solutions which could have the potential to significantly improve the performance of waste valorisation in different economic sectors.
Session Chairs
Fabrizio Passarini, Ecomondo STC and University of Bologna
Paolo Massarini, ATIA – ISWA
Programme
9.30 Introduction by the Chairs
Invited lectures
9.45-10.00 “Waste2BioComp” project: waste as valuable feedstock for sustainable bio-based packaging
Renato Mortera, Propagroup
10.00-10.15 Life “New4Cartridges”: a new circular paradigm for Reuse and Recycling of Ink Cartridges
Federica Gerardi, Eco Store
10.15-10.30 Horizon “Deep Purple”: conversion of diluted mixed urban bio-wastes into sustainable materials and products in flexible purple photobiorefineries
Representative of Circular Bio-based Europe Joint Undertaking, Novamont, Mater-Biotech
Speeches selected from the Call for Papers
Topic: Treatment of inorganic materials
10.30-10.45 An innovative biotechnology for the recovery of strategic copper from printed circuit boards
Becci Alessandro, Amato Alessia, D'Arcangelo Matteo, Beolchini Francesca - Department of Life and Environmental Sciences-DiSVA, Università Politecnica delle Marche
10.45-11.00 Improving the current technology for spent Li-ion batteries valorisation
Alberto Mannu, Maria Enrica Di Pietro, Viviana Bosello, Andrea Mele - Department of Chemistry, Materials and Chemical Engineering “G. Natta”, Politecnico di Milano
11.00-11.15 Recovery of critical raw materials from end-of-life electronics through chemical and biotechnological methods
Max Torrellas, Santiago Llopis, Javier Grau - AIMPLAS
11.15-11.30 The experiences and challenges in recycling and recovery of strategic metals from different resources
Andrea Miskufova, Takacova Zita, Piroskova Jana - Institute of Recycling Technologies, Faculty of Materials, Metallurgy and Recycling, Technical University of Kosice, Slovakia
11.30-11.45 Steps Forward in the Recovery of End-Of-Life Commercial Refrigerators: The LIFE VICORPAN Project
Simone Bechi, Cannon Afros S.p.A
11.45-12.00 Use of ceramic wastes to develop low carbon cement for Made in Italy furniture industry
Lucia Ferrari, Elisa Franzoni - Department of Civil, Chemical, Environmental, and Materials Engineering (DICAM) University of Bologna
12.00-12.15 Rejuvenators & Warm Mix Asphalt: a vision for a sustainable future
Loretta Venturini, Carlo Carpani - Iterchimica S.p.A
12.15-12.30 Mild alkali activation: a sustainable method for valorization of glasses and volcanic inorganic residues
Emanuele De Rienzo (1), Antonio D'Angelo (2), Veronica Viola (2), Michelina Catauro (2), Francesco Carollo (3), Enrico Bernardo (3), Luisa Barbieri (1), Cristina Leonelli (1), Isabella Lancellotti (1); (1): Department of Engineering "Enzo Ferrari", University of Modena and Reggio Emilia; (2): Department of Engineering, University of Campania "Luigi Vanvitelli"; (3): Department of Industrial Engineering, University of Padova
12.30-12.45 Alkali activation as suitable environment solution: from scraps to building materials
Giulia Tameni, Francesco Carollo and Enrico Bernardo - Department of Industrial Engineering, Università degli Studi di Padova
Topic: Treatment of polymeric materials
12.45-13.00 Innovative recovery techniques for Waste from Electrical and Electronic Equipment: triboelectrostatic separation for plastic recycling
A. Fiorente (1), G. D’Agostino (1), M.E. Di Clemente (1), G. Mancarelli (2), C. Natuzzi (2), A. Petrella (1), G. Santomasi (1), F. Todaro (1), M. Notarnicola (1); 1. DICATECh - Polytechnic University of Bari, 2. Kyma Ambiente
13.00-14.00 Break
14.00-14.15 The new EU regime for recycled plastic food contact material - A game changer?
Ken Huestebeck, Styrenics Circular Solutions (SCS) association
14.15-14.30 Plastics Recycling from and for home appliances, toys and textile
Tatjana Kosanovic, Christina Podara, Christos Tsirogiannis, Melpo Karamitrou, Costas Charitidis - Research Lab of Advanced, Composites, Nanomaterials and Nanotechnology (R-NanoLab), Materials Science and Engineering Department, School of Chemical Engineering, National Technical University of Athens
14.30-14.45 BioFashionTech
Fabiola Polli, Founder and CEO
14.45-15.00 Renewable and residual sources for the preparation of styrene-free thermosetting materials
Federica Zaccheria, Nicoletta Ravasio, Benedetta Palucci, Adriano Vignali, Fabio Bertini - CNR SCITEC
15.00-15.15 REMEDIES: Co-creating strong uptake of remedies for the future of our oceans through deploying plastic litter valorization and prevention pathways
Ilaria Canesi, Daniele Spinelli, Matteo Maccanti, Noemi Cei, Elena Merli, Tommaso Nieri, Carlotta D'Aleo - Next Technology Tecnotessile
Topic: Treatment of organic materials
15.15-15.30 Upcycling of Wastewater Sludge to PHA-rich biomass. The B-Plas process in the CROSS-Life EU project
Alisar Kiwan, Daniele Pirini, Davide Collini - B-Plas Sbrl; Michele Zaghini, Giacomo Castagna - AqA Srl.; Massimo Facchini - Herambiente Spa; Chiara Samorì, Cristian Torri - University of Bologna, Dipartimento di Chimica "Giacomo Ciamician"
15.30-15.45 Outstanding anaerobic conversion of food waste and sludge into marketable carboxylic acids and bioenergy for sustainable urban biorefineries
Agata Gallipoli1, Barbara Tonanzi1, Alessandro Frugis2, Andrea Gianico1, Marco Lazzazzara2, Francesca Angelini1, Stefania Angelini1, Simona Crognale1, Michela Sbicego1, Giancarlo Cecchini2, Camilla M. Braguglia1 - 1 Water Research Institute, CNR-IRSA, Area della Ricerca RM1, 2ACEA ELABORI S.p.A.
15.45-16.00 Enzymatic and microbial conversion technologies to recycle and valorize single-use bioplastic items
Marthinus Wessel Myburgh1,2,3 Dominique Rocher1,2,3, Leonardo Faggian1, Daniele Vezzini1,3, Alessandro Calzavara4 , Lara Facchini4, Alessandra Lorenzetti4, Marinda Viljoen-Bloom2,3, Lorenzo Favaro1,2,3 - 1Waste to Bioproducts Lab, Department of Agronomy Food Natural resources Animals and Environment (DAFNAE), Padova University, Agripolis, Legnaro, 2 Urobo Biotech, Stellenbosch, South Africa, 3 Department of Microbiology, Stellenbosch University, Matieland, South Africa, 4 Department of Industrial Engineering, Padova University
16.00-16.15 Industrial Applications of Biodegradable Biopolymer-Hemp Composites
Lorenzo Gallina, Salah Chaji, Maela Manzoli and Giancarlo Cravotto - Department of Drug Science and Technology, Università di Torino
16.15-16.30 The potential of calcifying marine microalgae within the circular economy: Perspectives on carbon sequestration and bioproducts
Manuela Bordiga1, Claudia Lupi2, Eleonora Sforza3, Elisa Palandri1,3, Veronica Buson3, Elena Barbera3, Chiara Bonatelli2,4, Stefania Bianco2,4, Cinzia de Vittor1, Adriano Carrara5, Davide Alberti5 - 1 National Institute of Oceanography and Applied Geophysics (OGS), 2 Department of Earth and Environmental Sciences, University of Pavia, 3 Department of Industrial Biotechnology, University of Padova, 4 University School for advanced Studies IUSS Pavia
Topic: Waste-to-Fuel/Energy treatment
16.30-16.45 Waste to Net Zero: Harnessing Waste-to-Energy with Carbon Capture to advance the Circular Economy
Robert Doyle, ESWET - European Suppliers of Waste-to-Energy Technology
16.45-17.00 H2-Synergy: Hydrogen and syngas for eco-green fuel production via high temperature electrolysis in synergy with gasification of residues
F. Basile, E.Orfei, V.Saraceni, A.De Pascale, A. Contin, A.Paglianti, A.Gondolini, E.Mercadelli, A.Sanson, N.Marmiroli, M.Marmiroli, A.Malcevschi, N.Baraldi. M.Errani. E.Bonaccorso, V.Galletti - CIRI Frame Università di Bologna, CNR-ISSMC, CIDEA Università di Parma, Iridenergy, Fondazione Flaminia
17.15 Discussion and closure by the Chairs
POSTER SESSION
1. The most modern recycling center in Europe
Wiegon GmbH, Municipality of Ischgl, Austria
2. Circular economy and sustainable agriculture: hydroxyapatite from biowastes as smart nanofertilizer – PRIN CLEOPATRA
Luca Marchiol, Department of Agrifood, Environmental and Animal Sciences University of Udine (I)
3. Circular lighting project: Loome the infinite design
Matteo Seraceni, Giulia Sodano, Alessandro Battistini - Hera Luce
4. Glucose Production from Cellulosic Sludge: Innovating Wastewater Recovery
Federico Micolucci, Nicola Frison - Department of Biotechnology, Verona
5. Second Life Lithium Battery - A better way before recycling
Matteo Cavalletti, Francine Castro, Andrea Saletti
6. India Global Benchmark for Solar PV Panel End-of-life Management
Jaideep N. Malaviya, Malaviya Solar Energy Consultancy, INDIA
7. Impianto di recupero solidi derivanti dal dilavamento di cumuli di inerti
Stefano Puzzarini c.o. SAPIR Porto Intermodale S.p.A Ravenna
8. Economia Circolare e Nanotecnologie per la Protezione Sostenibile delle Piante
Muawiya M.A., Schiavi D., Francesconi S., Miccoli C., L. Felici, Cardacino A., L. Albanese, A. Marrucci, Balestra G.M. - Dipartimento di Scienze Agrarie e Forestali DAFNE, Università degli Studi della Tuscia
9. Il metodo Ecocircular di generazione di materie prime seconde dal trattamento di plastiche non riciclabili
Valter Maria Santoro, IGeS World srl
10. The Endless Loop of Plastic: Towards Complete Recycling
Paolo Rebai, Promeco s.p.a.
11. Boosting dark fermentation of cheese whey with Electrically Conductive Materials
Carolina Cruz Viggi1, Cecilia Petitta 1,2, Matteo Tucci1, Matteo Daghio3, Chiara Capelli3, Carlo Viti3, Alessandra Adessi3, Luca di Palma2, Federico Aulenta1; 1 Water Research Institute (IRSA), National Research Council (CNR), Italy 2 Department of Chemical Engineering Materials Environment, Sapienza University of Rome Italy, 3 Department of Agriculture, Food, Environment and Forestry (DAGRI), University of Florence
12. Incorporating post consumer plastic waste in a high performance compound intended for automotive interiors applications: the case of "Aurora" project
Leonardo Forner, Sustainability Manager Sirmax Group
13. Crosspreg® the Circular Innovative Reactive Prepreg, solvents and fridge free, with Natural fibres for Composite Mass Production
Gianluigi Creonti, Crossfire Srl, Graphene Flagship affiliate
14. Technology Environment Care and ELT recycling
Luigi Piarulli
15. Enhanced Per and Polyfluoroalkyl Substances (PFAS) Removal in Landfill Leachate: A Comparative Study of Electrocoagulation, Adsorption, and Hybrid Treatment Methods
Ghulam Sarwar Soomro1,3, Enrico Boccaleri1, Valentina Gianotti1, Eleonora Longo2, Alice Zenone2; 1 Department of Sustainable Development and Ecological Transition (DiSSTE), University of Eastern Piedmont, 2 Research and Development department, Marazzato Soluzioni Ambientali s.r.l.
16. Bio-hydrogen production from biomass oxy-steam gasification: an experimental and numerical activity
Giacomo Flori1, Stefano Frigo1, Roberto Gabbrielli2, Federica Barontini2, Pietro Sica3, Enrica Bargiacchi4, Sergio Miele4; (1) Dipartimento di Ingegneria dell’Energia, dei Sistemi, del Territorio e delle Costruzioni (DESTEC), Università di Pisa, (2) Dipartimento di Ingegneria Civile e Industriale (DICI), Università di Pisa
17. MADAM system - a dry solution for wet problems: Magaldi’s commitment to a more sustainable waste management
Johan Boni, Matteo Maiello, Paolo Magaldi
18. InterWASTE project: A Second Life for Eyewear, Decor and Timber Industry Waste Products
1Marco Calvi, 1Leano Viel, 2Katrin Fradler, 2Jocham Christoph, 3Federico Gallo, 3Silvia Fiasco; 1. Certottica Scrl, 2. Kompetenzzentrum Holz GmbH, Area Wood & Paper Surface Technologies, Glan - Austria, 3. ELITE Ambiente s.r.l. Greenthesis Group
19. Transizione 5.0 e DfR - Progettazione per la facilitazione del riuso e del riciclo per una effettiva Transizione 5.0
Antonio Iuliano, Polo Tecnologico Alto Adriatico, EAL Srl
20. CISUFLO: paving the way towards circular sustainable flooring
Ine De Vilder, Guy Buyle - Centexbel-VKC
21. Polyphenols and flavonoids extraction from citrus waste
Giorgia Pellegrino (1-2), Paola Zitella(1); (1) Environment Park, Torino, Italy (2) Politecnico di Torino, Torino, Italy
22. LCA and LCC assessment of promising hydrometallurgical routes utilized for metal recovery from waste Li-ion batteries
Dilshan Sandaruwan Premathilake, DICATAM, University of Brescia, Brescia, Italy; Teklit Gebregiorgis Ambaye, DERE, Technical University of Denmark, Copenhagen, Denmark; Amilton Barbosa Botelho Junior, Department of Chemical Engineering, Stanford University, Stanford, CA, USA; Ana Teresa Macas Lima, DERE, Technical University of Denmark, Copenhagen, Denmark; Denise Crocce Romano Espinosa, Department of Chemical Engineering, University of São Paulo, São Paulo, SP, Brazil; Mentore Vaccari, DICATAM, University of Brescia, Brescia, Italy
23. Beyond Circular Economy: the role of stock, recycling and virgin material
Roberto Chirone - Dipartimento di Ingegneria Chimica, dei Materiali e della Produzione Industriale, Università degli Studi di Napoli Federico II, and eLoop srl, Napoli, Italy; Roland Clift, Centre for Environment and Sustainability, University of Surrey, UK
24. Nitrogen recovery from municipal sewage sludge
Jakub Krajewski, BIORESTEC GmbH
25. Management and Recovery of Composite Materials
Alessandra Carboni, Riccardo Festante
26. WASTEWATER TREATMENT PLANTS AS RESOURCE RECOVERY PLANTS: MILAN AREA CASE
Alessio Cupaioli, Cap Evolution Davide Scaglione - Cap Evolution
27. Chemical recycling of flexible polyurethane foam from end of life mattresses
Antonio Valerio, Angelo Russo, Laura Mastronardi, Fabio Sebastiano - Recupero Etico Sostenibile Spa
28. MY: from plastic waste to resource for the textile sector
Antonio Valerio, Angelo Russo, Laura Mastronardi, Fabio Sebastiano - Recupero Etico Sostenibile Spa
29. From inner tube to a crampons
Decathlon Produzione Italia s.r.l. Oldrati Guarnizioni Industriali S.P.A. ESO Recycling Società Benefit a.r.l.
30. Upcycling of un-recyclable Opal glass waste through alkali activation
Francesco Carollo(1), Giulia Tameni(1) and Enrico Bernardo(1) - (1) Department of Industrial Engineering, Università degli Studi di Padova, Padova, Italy
31. From waste to worth and wealth: Circular Materials Development and the design of an Eco-Social Material Library
Sara Valassina, Romina Santi, Flavia Papile, Andrea Marinelli, Barbara Del Curto
32. REMODEL: A ciRcular compositE Materials Design for a sustainabLe innovation of made in Italy
Romina Santi (1), Sara Valassina (1), Andrea Marinelli (1), Chiara Del Gesso (2), Carmen Rotondi (2), Carlo Martino (2), Barbara Del Curto (1), Sabrina Lucibello (2), Mariapia Pedeferri (1) - Department of Chemistry, Materials, and Chemistry Engineering, Politecnico di Milano, Italy, (2) Department of Planning, Design, Technology of Architecture, Sapienza Università di Roma, Italy
33. GREEN-LOOP: Sustainable Bio-based Materials and Circular Economy Solutions
Luis Enrique Acevedo Galicia, IDENER (ES); Adam Sparkes, National Composites Centre (UK); Jens Schmidt, Fraunhofer ISC (DE); Marco Scatto, Mixcycling (ITA)
34. Valorization of Spent Ground coffee as Renewable source to methylene blue removal.
Fella-Naouel Allouche1, H. Doudou, S. Hamideche 2, A.Ghezloun1 - 1 Centre de Développement des Energies Renouvelables (CDER), BP. 62, Algiers, ALGERIA. 2 Université Des Sciences et Technologie Houari Boumedienne, Algiers, ALGERIA.
35. Decentralized Solid Waste Treatment, in a Box!
Michail Maniadakis, Foundation for Research and Technology Hellas, Greece Abhimanyu Chakravorty - International Solid Waste Association, The Netherlands Myrto Pelopida, Axia Innovation, Germany
36. From biowaste to soil regeneration: the Bin2Bean approach
Sara Daniotti (Consorzio ITALBIOTEC), Juliette Soudon (EUROQUALITY), Giulio Poggiaroni (ETA Florence Renewable Energies)
37. Innovative recycling of lithium-ion batteries: ex-ante LCA of Tech4Lib technology
Federico Rossi*, Marta Fundoni**, Nicola Fabbri**, Filippo Corsini*, Monia Niero*, Fabio Iraldo** - * Sant’Anna School of Advanced Studies, Interdisciplinary Center for Sustainability and Climate, Pisa, Italy ** Sant’Anna School of Advanced Studies, Institute of Management, Pisa, Italy
38. Recovery and valorization of plastic
Flavia Marzulli (1), Sogand Musivand (2), Benedetta De Caprariis (2), Paolo De Filippis (2), Giulia Simonetti (1), Carmela Riccardi (3), Marianna Villano (1) - (1) Department of Chemistry, Sapienza University of Rome, Rome, Italy; (2) Department of Chemical Engineering Materials Environment, Sapienza University of Rome, Rome, Italy; (3) INAIL-DIT Rome, Italy
39. Innovation and circularity of waste recovery processes: between research and development of a circular ecosystem in the enterprise Vico s.r.l.
Alessandro Barra (PhD student, Politecnico di Torino), Guido Callegari (Professor and PhD, Politecnico di Torino), Andrea Negro (Company owner, Vico s.r.l.), Davide Pirotto (Asbestos technical manager, Vico s.r.l.)
40. Study and elaboration of new strategies, techniques, methods and management for the large-scale remediation of offshore seabeds in Italian seas
Federico Camilleri, freelance researcher - FISHING TECHNICAL COMPANY consultant
41. Grape stalk: a first attempt to disentangle its fibres via electrostatic separation
Umberto Cancelli (University of Modena and Reggio Emilia and University of Parma), Giuseppe Montevecchi (University of Modena and Reggio Emilia), Francesca Masino (University of Modena and Reggio Emilia), Claire Mayer-Laigle (UMR IATE - L'Unité Mixte de Recherche Ingénierie des Agropolymères et Technologies Emergentes, Montpellier), Xavier Rouau (French National Institute for Agriculture, Food, and Environment (INRAE) | INRAE · Department of Science and Process Engineering)
42. Exhibition design and reuse of disused materials
Elisa Mastrofrancesco, Minimolla Design
43. Green engineering solutions: a new LIFE for sediments and shells: preliminary results
P. Ydav (1), F. Dimunno (1), F. Furlani (2), R. Petti (1), A. Petrella (1), F. Todaro (1), G. Vitone (3), C. Vitone (1), M. Notarnicola (1) 1) DICATECh, Polytechnic University of Bari, (BA) 2) SIMEM S.p.a., Minerbe (VR) 3) Vitone Eco S.r.l, Bitonto (BA)
44. Utilizzo e riciclo dei rifiuti a matrice organica nel settore agricolo
Giulio Giannoli
45. DC thermal plasma process for the production of AM powders
P. Iovane1, C. Borriello1, S. Portofino1, N. Fedele2, A. Di Girolamo Del Mauro1 and S. Galvagno1 - 1 SSPT-PROMAS-NANO CR. ENEA “Portici”, 2 Consorzio CALEF
46. Recovery of carbon fibres from aircraft industry waste and product valorization for Additive Manufacturing applications
Sabrina Portofino, Carmela Borriello, Sergio Galvagno, Pierpaolo Iovane, Loredana Tammaro - ENEA, Department for Sustainability, Sustainable Manufacturing Technologies and Materials Division, Components and Intelligent Systems for Sustainable Manufacturing Laboratory, Portici (Na), Italy
47. Migliorare il riciclo dei pannelli fotovoltaici: il progetto PV lighthouse
Pietrogiovanni Cerchier (1), Francesco Miserocchi (1), Alberto Nalon (1), Valerio Verderio (2), Federico Malgarini (2), Francesco Nisato (3), Graziano Tassinato (3), Massimo Zanutto (3). – (1) 9-Tech srl, (2) Haiki+ srl, (3) Green Propulsion Laboratory, Veritas s.p.a.
48. Dall'elemento acqua, nuove tecnologie naturali per il riciclo e trasformazione dei rifiuti ittici in nuove forme di energia pulita per la generazione di idrogeno, biocombustibili da utilizzare in sistemi integrati scalabili, predisposti al monitoraggio ambientale nel settore della Blue Economy e dell'Offshore Energy
Mauro Panìco - ITARIS Srls; Alessio Canalini - The Sea Opportunities Srl; Daniele Comella - Hydorghen Srl.
49. Unlocking the potential of End-of-Life composites: the DeremCo project
Marco Diani, Davide Delfrate, Marcello Colledani - Politecnico di Milano, Mechanical Department
50. Advancing biogas upgrading for a circular economy: biological carbon dioxide conversion to biofuels and bioplastics
Maria Silvia Morlino (1), Tatiana Spatola Rossi (1), Luca Francescato (1), Marco Demo (1), Bettina Mueller (2), Isabella Porqueddu (2), Stefano Campanaro (1), Laura Treu (1), Tomas Morosinotto (1) - Department of Biology, University of Padua, Padova, Italy, (2) BTS Biogas S.r.l., Affi (VR), Italy
51. Enabling plastic circularity through system change - Molecular recycling maximizing material to material plastic recycling
Inari Seppa, Circular Advocacy EMEA
52. The role of Producer Organisations in making certain agro-food processing practices innovative and sustainable
Silvia Baralla, Consiglio per la ricerca in agricoltura e l'analisi dell'economia agraria - Centro di ricerca Politiche e bioeconomia, Roma; Andrea Saba - Scuola Superiore Sant'Anna, Pisa
53. Enhancing sustainability in Central Europe's agri-food sector: analyzing value chains and biomass utilization
Notarfrancesco (1), Davide Don, Leonardo Venturoso - Fraunhofer Italia Research Scarl, Italy
54. Resource audit and industrial symbiosis: application to a high-performance bifacial photovoltaic modules GigaFactory
Antonella Luciano (ENEA), Marco La Monica (ENEA), Laura Cutaia (ENEA), Raimondo Spada (ENEL 3 SUN), Andrea Tecci (ENEL)
55. Evo Fusion: Direct processing of 100% recycling material in new blown film products
Sascha Skora, Christoph Lettowsky - Reifenhäuser Blown Film
56. Microwave assisted co-pyrolysis of plastic waste for up-cycling into valuable products
Tayyaba Gull (a), Mauro Marone (a), Paolo Marasco (a), Marcello Salvatori (b), Mario Fedele (b), Matteo Francavilla (a) - a) STAR*Facility Centre, Department of Agriculture, Food, Natural Resources, and Engineering (DAFNE), University of Foggia, Foggia, Italy b) Sistemi Energetici S.p.A., Foggia, Italy
57. Recovery, recycling and reuse in the tanning sector: virtuous innovations and correct management of intellectual property
Barbara Politi, Addì Srl
58. Recycling processes by selective dissolution of multi-material products and textiles
Martino Colonna and Filippo Biagi, RE-SPORT srl and University of Bologna, Bologna
59. Complete recycling process of end-of-life leather shoes: the LIFE RE-SHOES project
Tiziano Giordano, Calzaturificio S.C.A.R.P.A. S.P.A. Asolo (TV) Italy; Martino Colonna - RE-SPORT srl and University of Bologna, Bologna, Italy
60. Blockchain and cryptocurrencies for the financial value of the circular economy: the challenge of exploiting the eco-design principles for a new value of the environment
Enrico Maria Mosconi, Università degli Studi della Tuscia
61. BIONEER: scaled-up production of next-generation carbohydrate-derived building blocks to enhance the competitiveness of a sustainable european chemicals industry
Patrizia Circelli, Simona Mincione - Ciaotech srl (PNO Group), Rome, Italy
62. MICROORC: Orchestrating Food System Microbiomes to Minimize Food Waste
Patrizia Circelli, Simona Mincione - Ciaotech srl (PNO Group), Rome, Italy
63. PYROCO2: Demonstrating sustainable value creation from industrial CO2 by its thermophilic microbial conversion into acetone
Anna Franciosini, Patrizia Circelli, Letizia Maestroni - Ciaotech srl (PNO Group), Rome, Italy
64. Value added recycled materials from construction and demolition waste
Corrado Gatti - Gruppo Gatti S.p.A., Lograto (BS), Italy Alan Piemonti, Giovanni Plizzari and Sabrina Sorlini - Department of Civil, Environmental, Architectural Engineering, and Mathematics (DICATAM), University of Brescia, Italy
65. Life cycle assessment of biostimulants production in a circular economy perspective
Zoli Michele, Ferraro Luca., Bacenetti Jacopo, Ferrante Antonio, Borin Sara - Università degli Studi di Milano
- Resource efficiency and Circular Economy
- Onsite event